The specific use of rubber screen printing ink is as follows:

1, high temperature vulcanization transfer, first will need to print the pattern or through 160-350 mesh printing to BOPET polyester film, and then the film is attached to the rubber products, through 140-180 degrees Celsius high temperature vulcanization 10-30 minutes, decal paper pattern is completely transferred to the rubber products.

2, first transfer after vulcanization can also achieve the same school effect, transfer method has two kinds of water transfer and cold transfer, water transfer nine with cellophane printing completely dry, in the rubber products coated with some solvent, the printed glass decal paper stick on the rubber products, then put some water on the cellophane, the cellophane can be removed; Cold transfer PP paper printing, PP paper printed on the release agent, dry and then printed ink, coated with solvent on rubber products, and then PP paper paste up, and then remove PP paper can be.

SQQ ink is used for direct printing on some rubber products with relatively high elasticity, such as balloons. It has the advantages of large scalability, bright color and good adhesion.

The specific method is as follows: the balloon is filled with a part of the gas and fixed on the printing table, so that the part to be printed is exposed, and then the 120-300 mesh screen is directly printed. It should be noted that the ink must be completely dry before the gas can be released and the hardness of the scraper should not be too high. Suzhou silk screen printing ink