The ink layer of epoxy screen printing ink is uniform and bright, the pigment has good dispersity and fineness, good mesh and leveling, and has excellent adhesion to the polar substrate after curing. The film has high hardness, luster and good water resistance, weather resistance and chemical resistance. According to the Chinese epoxy resin industry Association (www.epoxy-e.cn) experts, it is becoming a new hot application of epoxy resin. The scope of application of this product includes: a variety of metal, glass, ceramic, wood, melamine products, UPE products, cross-linked PU products, and after surface treatment of PE, PP products, and vacuum electric (steam) plating products, its conventional performance is mainly: viscosity: 5000 ~ 15000CPS(depending on temperature, color), adhesion: 5B optimal, drying conditions (with the use of KT-000 curing agent as an example) : 120 ~ 130℃ 20 minutes of complete curing (dry), 80 ~ 90℃ 2 hours of complete curing, temperature 25℃/ humidity 75℃ 1 day hard dry 4 days of dry, net performance: 77T ~ 165T mesh? (gold, silver, pearl powder ink except). Suzhou silk screen printing ink

It is reported that the product is used for KT special diluent diluent, defoaming agent for KT special defoaming agent, coating area of 10 ~ 20㎡/kg(coating area test to 120T polyester monofilament sensitive adhesive, screen version as standard), curing agent for KT-000 glass curing agent, EP-002 for metal curing agent. China Epoxy Resin Industry Association (www.epoxy-e.cn) experts suggest that the operation method is: the use of KT series of ink, should be used with KT series of curing agent, ratio (main agent: curing agent)=100:20; Before use, it should be stirred fully for 10 minutes with KT curing agent in a given proportion; Add 10 ~ 30% thinner for dilution as needed; The contaminated material should be cleaned or wiped with degreasing oil on the surface to facilitate excellent printing effect; Printing errors should be removed with wipe word water before not completely dry, re-print; When the screen plate is blocked in the printing process, clean it with plate washing water before printing; Color matching should be in the front color table dry or hard dry after color matching; Adhesion, hardness, acid resistance, oil resistance, oil resistance to stain, scratch resistance, wear resistance and other properties detection, need ink layer completely solidified rear can be detected; Without permission shall not be KT series ink and other types of ink mix and color.